Text only | Text with Images

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: AKmud on February 07, 2011, 09:34:00 PM

Title: Titebond and Phenolic?
Post by: AKmud on February 07, 2011, 09:34:00 PM
I'm wanting to put a decorative phenolic layer in my next handle section but the only glue I have available at this time is TB III...  Will it work or do I have to go another route?  

Thanks in advance!
Title: Re: Titebond and Phenolic?
Post by: AKmud on February 08, 2011, 12:27:00 AM
Anyone?
Title: Re: Titebond and Phenolic?
Post by: JamesV on February 08, 2011, 02:46:00 AM
I wouldn't trust TBIII on anything other than wood. I glued up a riser and used some glass as accent strips and it didn't hold long. Epoxy is what I use. You can order samll units of somooth-on from sponsors here.

James...................
Title: Re: Titebond and Phenolic?
Post by: Mike/Columbia Basin on February 08, 2011, 10:03:00 AM
I wouldn't try TiteBond on phenolic either. If it did stick it wouldn't be for long.
Text only | Text with Images