Ok, I have a quick question for everyone. When you have a light wood and a dark wood joined together, how do you prevent the dust from the dark wood from staining the lighter wood as you sand? Any tips or suggestions?
Thanks,
Steve
I did a bow once that had both paduak and curly maple in the riser and I had the problem of the paduak coloring the maple. I just kept sanding with finer and finer grits and eventually went to steel wool and it kind of cleaned itself up.
Yup.. do the same thing. I just did a paduak and yellow heart.. once I got down to the 320 grit, seemed to stop spreading and cleaned up the yellow heart.