I commited the no. 1 sin f bowyering. I was in a HURRY and didn't pay enough attention. Anyways, when my latest attempt came of the form I noticed that I didn't add enough clamping pressure at the one fadeout area. I now have a small gap right at the fade out between the riser and the bowtuff. Can this be fixed? or should I discard the bow?
Dont discard it, first get some thin superglue and keep dropping it in that gap (if there is a hole) If your worried about too much pressure on the fade I would glue on some external power lams (search for power lams on here). That will move the pressur out a bit from the fade.
Posting a pic would be good too if you can.
I HAVE FIXED BOWS WITH LOCKTITE 420 IT WORKS WELL
Thanx, I'll try it :)