Print Page - Insert/Caps for takedown

Title: Insert/Caps for takedown
Post by: T Folts on May 28, 2010, 11:37:00 AM

Besides binghams where do you guy's get your threaded riser inserts, caps and nylon washers.
I make my own pins and allen wrenches I get local.
I think the price is a little steep so I am looking for other options..
Thanks
Terry

Title: Re: Insert/Caps for takedown
Post by: michbowhunter on May 28, 2010, 05:56:00 PM

I went through this a few years ago...looked all over and never found anything as good. Just easier to buy the sets from binghams and spend the few extra dollars! Plus, I like Binghams and would rather see them get my buisness anyway.
Hope this helps....

Title: Re: Insert/Caps for takedown
Post by: Moen on May 28, 2010, 06:00:00 PM

I use this.. Works well for recurves up to 70#..
(http://www.biltema.no/ProductImages/19/medium/19-1377_m.jpg)

Title: Re: Insert/Caps for takedown
Post by: T Folts on May 28, 2010, 08:43:00 PM

Thanks Jared

Title: Re: Insert/Caps for takedown
Post by: Sharp Shooter on May 29, 2010, 06:55:00 PM

Kennym will have them. You can contact him on this site. Tony

Title: Re: Insert/Caps for takedown
Post by: John Cooper on May 29, 2010, 10:14:00 PM

Terry,

Try looking at McMaster-Carr's website. "www.McMaster.com" I think. Be careful, though. It's easy to get sucked into all the cool stuff they have.

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: T Folts on May 28, 2010, 11:37:00 AM