How much space is needed for the air hose between the top and bottom of the bowform??? For a longbow.
justin
With my pressure strip, 1 1/4". My pressure strip is rubber about 5/16 thick.
I know 1 1/8 is too tight.
1 1/4" will let me bolt the form up with just a little squeeze with a bar clamp.
ok. I will play with those numbers. Thanks Kenny!!
:wavey:
Just make sure it is evenly spaced the entire length (except riser area of course). 1 1/4" is what I use also and it require just a little squeeze.