Here is a motor unit that I saved when my kids' 'bounce house' ripped for the last time.
I intend on mounting it on the underside of a 3/4" piece of plywood to use as a spindle sander, but I don't know the best way to mount the spindle! Any suggestions?
(http://i872.photobucket.com/albums/ab287/Pictures4scott/spindlesandermotor.jpg)
Thanks,
Scott
Disregard...
a set of spindles cost about $450 and have a special taper to center and seat. You would need a machine shop buddy. If your spindle is not exact centered you will be pretty unhappy with the machine. Jim