Print Page - degree

Title: degree
Post by: penrosefred on December 10, 2009, 06:24:00 PM

On a take down riser what degree do you cut for the limb to riser connection? I sure like this site

Title: Re: degree
Post by: kennym on December 10, 2009, 09:38:00 PM

Hi Fred,
The design of the bow will govern it,but I THINK Binghams TD recurve is 11 degrees.

Their TD longbow is straiter with the riser.

Title: Re: degree
Post by: 3point or better on December 10, 2009, 11:35:00 PM

Hi fred,
if you are making a recurve my bingham paper work says 21 .degrees

Title: Re: degree
Post by: kennym on December 11, 2009, 07:07:00 AM

OOPS !! Been awhile!

Title: Re: degree
Post by: mikieg on December 11, 2009, 11:45:00 AM

i wonder if it matters what side of the riser the limbs will be mounted on? like, what is the angle on a blackwidow recurve, as compared to a regular (limbs in front)riser?

Title: Re: degree
Post by: penrosefred on December 11, 2009, 12:54:00 PM

Mine will be long bow stright limb, so now what degree?

Title: Re: degree
Post by: Osagetree on December 12, 2009, 08:05:00 PM

TTT

Title: Re: degree
Post by: kennym on December 13, 2009, 09:33:00 PM

The pronounced longbow TD is 11 degrees,I still have that plan.....

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: penrosefred on December 10, 2009, 06:24:00 PM