Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: Scott Beitzel on December 03, 2009, 10:40:00 PM

Title: heres my first board bow build
Post by: Scott Beitzel on December 03, 2009, 10:40:00 PM
(http://i463.photobucket.com/albums/qq360/scoremaster/IMAG0017.jpg)not to bad have a little bad bend in the bottom limb   :scared:  took a hair to much with the band saw .  :readit:  

thanks,
Scott
Title: Re: heres my first board bow build
Post by: Pat B on December 03, 2009, 10:51:00 PM
That bow needs to be shot and the next one started. Band saws kill lots of bows so use yours more gingerly the next time.
Title: Re: heres my first board bow build
Post by: Scott Beitzel on December 03, 2009, 10:55:00 PM
like i said pat it was a first and i kinda got in a hurry but will not be so with the next one cause i know you can't put the wood back  on once it's gone
Title: Re: heres my first board bow build
Post by: George Tsoukalas on December 03, 2009, 11:16:00 PM
...or not at all. Nice bow.  :)  Jawge
Title: Re: heres my first board bow build
Post by: pappy on December 04, 2009, 09:09:00 AM
Nice job on your first,Ya I have runied a few on the saw,I don't cut them near as close as I use to.Rough them in and rasp and scraper from then on.Congrats on you first.You might want to make the handle a little shorter on the next,keep all the working limb you can for that draw length.
  Pappy
Title: Re: heres my first board bow build
Post by: Scott Beitzel on December 04, 2009, 09:41:00 AM
thanks guys  .

am looking for wood as we speak so it's just a matter of finding it.

thanks for looking ,
Scott
Title: Re: heres my first board bow build
Post by: Dano on December 04, 2009, 09:49:00 AM
Nice first, keep up the good work. I'd get that upper limb bending more like the lower, but hey, build another, boards are cheap.
Title: Re: heres my first board bow build
Post by: Wulomac on December 05, 2009, 11:22:00 PM
Good looking bow!