Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: Scott Beitzel on November 26, 2009, 10:01:00 PM

Title: where to buy laminates
Post by: Scott Beitzel on November 26, 2009, 10:01:00 PM
was wondering where everyone buys the wood laminates for thier bow builds.
am thinking of trying a laminated bow build .

thnaks,
Scott
Title: Re: where to buy laminates
Post by: IdahoCurt on November 26, 2009, 10:38:00 PM
Bingham projects has been a good source with great service.
Title: Re: where to buy laminates
Post by: Stiks-n-Strings on November 26, 2009, 10:53:00 PM
I think alot of guys here go to KennyM here on the board. He should chime in here anytime. Maybe edit the title of your post Where to buy Lams instead of wood that should draw a little more attention from the lam guys here.
Good Luck Kris
Title: Re: where to buy laminates
Post by: Scott Beitzel on November 26, 2009, 11:08:00 PM
thanks guys will do and am  on the look out.

thanks,
Scott
Title: Re: where to buy laminates
Post by: Kanga on November 27, 2009, 12:20:00 AM
I make my own but from what I have seen KennyM is the man to talk too.
Title: Re: where to buy laminates
Post by: Russell S. on November 27, 2009, 01:14:00 AM
i just started building.  i bought my lams from kenny for my fiberglass bows.  all my all wood attempts i have ground my own.
Title: Re: where to buy laminates
Post by: Apex Predator on November 27, 2009, 05:42:00 AM
I still buy all mine from Kenny McKenzie.
Title: Re: where to buy laminates
Post by: Stiks-n-Strings on November 27, 2009, 09:10:00 AM
I figured these jump on here and direct you to KennyM. Have a look at his webpage.
If he's good enough for Apex he's goota be good cause Apex builds some nice bows.
Title: Re: where to buy laminates
Post by: kennym on November 27, 2009, 09:43:00 AM
Hi Scott,

The big meal put me to sleep yesterday!!

Here ya go,my site. I'd be more than happy to hook you up with some lams!!

http://kennyscustomarchery.com/

Thanks,Kenny
Title: Re: where to buy laminates
Post by: Scott Beitzel on November 27, 2009, 07:32:00 PM
thanks  guys and kenney wil check it out .

Scott