looking for about 30# at 28" 64" off kenny's R/D form. anyone got any thoughts on thickness. also my wife was a green riser like green green. any thoughts on what i can use to come up with a Bright green riser?
This green?
(http://i121.photobucket.com/albums/o203/Apex-Predator/BBI/Greenback-1.jpg)
That is green Tandy leather dye. This next one is with chocolate wiped over the top of the green.
(http://i121.photobucket.com/albums/o203/Apex-Predator/BBI/Finalfinish-1.jpg)
here is what I have so far ,here in the house(I know none lighter than these.)
.360= 52# average
.350 = 47# average
I havent built any light bows off it yet,but my "guess" would be .010" = 5# so around .320" to .325"
There is room to trim and/or trap if heavy,and piking to 62" gains 6# on the 50ish weight bows if light.
Hope this helps!
thanks kenny, i am going to make a recuve form next i think.... wife says i have to finish this one before i get supplies for another, yea marty that green!!! will maple take stain like that?