Text only | Text with Images

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: Dmaxshawn on June 30, 2009, 11:30:00 PM

Title: # 5 out of the oven
Post by: Dmaxshawn on June 30, 2009, 11:30:00 PM
heres # 5 Dont beat me up to bad.  She is 60 inches NTN 67LBS @ 28 inches.  I-beam type riser and elm cores with black glass.  18 inch Kingwwod phenolic rosewood phenolic kingwood riser and limbs.  shes really fast @ 67lbs and smooth.

 http://discussions.texasbowhunter.com/forums/showthread.php?t=91317

Shawn
Title: Re: # 5 out of the oven
Post by: Peckerwood on July 01, 2009, 12:07:00 AM
Looks like a good shooter to me. From the looks of the limb design it should be quiet too.

Bill
Title: Re: # 5 out of the oven
Post by: Robertfishes on July 01, 2009, 12:45:00 AM
looks like another good one! I just put my first recurve in the hot box at 11 PM. Are you going to be able to make the TBOF shoot in August?
Title: Re: # 5 out of the oven
Post by: tawmio on July 01, 2009, 12:47:00 PM
I just built one too that ended up at 65, i was able to take it down to 57.
Just curious what thickness of lams and glass did you go with.
Title: Re: # 5 out of the oven
Post by: Dmaxshawn on July 02, 2009, 10:52:00 AM
QuoteOriginally posted by tawmio:
I just built one too that ended up at 65, i was able to take it down to 57.
Just curious what thickness of lams and glass did you go with.
Glass was .040 and the lams I will have to look up in my book.  I think if I remember correctly it was .370 total

Shawn
Text only | Text with Images