Text only | Text with Images

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: Apex Predator on April 28, 2009, 11:33:00 AM

Title: Table saw blades?
Post by: Apex Predator on April 28, 2009, 11:33:00 AM
I need to know what the best type of blade would be to cut exotic hardwoods.  Tooth style and count?  Thanks guys!
Title: Re: Table saw blades?
Post by: bjansen on April 28, 2009, 12:47:00 PM
I have not tried an extensive array of blades, however I recently bought a CMT 40 tooth general table saw (.130 kerf) blade $50 or so on amazon and am very impressed with the results.  I used it to rip a bunch of bubinga, purpleheart, maple, hickory, etc into strips with good results.  

Next time I will opt for a thinner kerf though (for use when ripping stips).
Title: Re: Table saw blades?
Post by: TNstickn on April 28, 2009, 06:57:00 PM
CMT, the orange blades are without a doubt the BEST you can get. I would'nt buy anything else.
Title: Re: Table saw blades?
Post by: rainman on May 01, 2009, 07:51:00 PM
Forrest Blades, 40 tooth with the thin Kerf.
Title: Re: Table saw blades?
Post by: R.W. on May 03, 2009, 10:55:00 AM
I would second the Forrest, 40T thin kerf blade. With a little care, you could probably cut very thin lams, as long as you use a zero clearance insert.

The Freud blades are also quite good. (Glue line rip blade would be my choice)
Text only | Text with Images