Print Page - 52100 bush knife

Title: 52100 bush knife
Post by: 2Tim215 on May 17, 2014, 02:20:00 PM

A knife just finished for a client.

Forged 52100 with Red Milk wood scales, red liners and corby rivets. Tapered tang.

OAL = 214mm
Blade = 115mm x 34mm x 5mm
Sanded to 400#

(http://i819.photobucket.com/albums/zz112/nkwana/1_zps6f3cc769.jpg) (http://s819.photobucket.com/user/nkwana/media/1_zps6f3cc769.jpg.html)

(http://i819.photobucket.com/albums/zz112/nkwana/3_zps01869972.jpg) (http://s819.photobucket.com/user/nkwana/media/3_zps01869972.jpg.html)

(http://i819.photobucket.com/albums/zz112/nkwana/4_zps2240dff1.jpg) (http://s819.photobucket.com/user/nkwana/media/4_zps2240dff1.jpg.html)

Thanks for looking

Tim

Title: Re: 52100 bush knife
Post by: gudspelr on May 17, 2014, 02:23:00 PM

Looks very useful. I like the rivets, too.

Jeremy

Title: Re: 52100 bush knife
Post by: kbaknife on May 17, 2014, 08:37:00 PM

Pretty straight and clean.
Nice attention to detail.
Should serve someone well.

Title: Re: 52100 bush knife
Post by: 2Tim215 on May 18, 2014, 11:46:00 AM

thanks guys

Title: Re: 52100 bush knife
Post by: D.Ellis on May 18, 2014, 12:59:00 PM

Very nice.
Darcy :)

Title: Re: 52100 bush knife
Post by: 2Tim215 on May 19, 2014, 11:14:00 AM

Thanks Darcy

Title: Re: 52100 bush knife
Post by: Lin Rhea on May 19, 2014, 01:11:00 PM

Attention to detail, as Karl mentioned, is so important in a "simple" knife. This design and execution is so nice.

Again, sometimes "simple" is not so simple.

Title: Re: 52100 bush knife
Post by: 2Tim215 on May 22, 2014, 10:24:00 AM

Thanks!

Trad Gang

Main Boards => Hunting Knives and Crafters => Topic started by: 2Tim215 on May 17, 2014, 02:20:00 PM