Don't ever ask me to get something done in a hurry - OK?
It was either 4 years ago or 5 - I'm just not sure.
Brian Thie and I were watching Bill Wiggins and Daniel Warren do a San Mai demo at the Mid-America ABS hammer-in.
I looked at Brian and he looked at me and we simultaneously said, "Wonder what that would look like with Damascus?"
So - all this time later, I finally get around to doing one.
It's a really over-cast and cloudy day here, today, but normally a bit of sun would showcase the really nice chatoyance this Damascus has.
I am going to hot-blue it, like I do with all my Damascus, and it will show up even better then.
But, I just got this etched and thought I'd toss it out here for folks to see.
(http://i28.photobucket.com/albums/c247/kbaknife/Trad%20Gang/SMDama2_zpsc5b11d09.jpg) (http://s28.photobucket.com/user/kbaknife/media/Trad%20Gang/SMDama2_zpsc5b11d09.jpg.html)
(http://i28.photobucket.com/albums/c247/kbaknife/Trad%20Gang/SMDamb2_zps3f7ed09d.jpg) (http://s28.photobucket.com/user/kbaknife/media/Trad%20Gang/SMDamb2_zps3f7ed09d.jpg.html)
(http://i28.photobucket.com/albums/c247/kbaknife/Trad%20Gang/SMDamd2_zpsb3faa547.jpg) (http://s28.photobucket.com/user/kbaknife/media/Trad%20Gang/SMDamd2_zpsb3faa547.jpg.html)
(http://i28.photobucket.com/albums/c247/kbaknife/Trad%20Gang/SMDamc2_zps5b4cb036.jpg) (http://s28.photobucket.com/user/kbaknife/media/Trad%20Gang/SMDamc2_zps5b4cb036.jpg.html)
Karl, That's some fine work, There is a lot of talent in that knife
KNOCKOUT!
That's fine as frog hair Karl!
Karl, that is very cool I love it!
I enjoy seeing what you create and from time to time enjoy looking at your web site. However you do not have your site published here! Do you still have a web site?
Steve
-----------
Potomac Forge
Member, W.F. Moran Jr. Museum & Foundation
http://www.andersenforge.com/
EXCELLENT :thumbsup:
Thanks, gentlemen.
To tell you the truth - I had no idea how it was going to turn out.
The case is not yet closed on this knife, however.
It will still go through some changes and I have yet to hot-blue one of these!
Very nice Karl.
Karl, that looks great
Looking good Karl. I like the effect.
Chris
Thanks. But I'll be honest - it's not so much the "effect" I'm after as much as it is succeeding at the challenge of welding stainless steel to tool steel.
They really would rather not be together.
And the process of pulling it off is a one-shot deal.
You either nail the weld - or fail.
I'd rather get the weld, draw it out and see a little bit of what it's like, and then move on and do another one!!
QuoteOriginally posted by akaboomer:
Looking good Karl. I like the effect.
Chris
"As you once told me" Challenges like this is what makes us better knife makers.
(and IMHO Master Smiths)
I am so old I don't get impressed much, but you are working on it . :thumbsup:
Keep up the Good Work!
Every time I succeed at something - I'm impressed!