Print Page - Just finished a few.

Title: Just finished a few.
Post by: Track on February 13, 2013, 06:38:00 PM

(http://s1187.beta.photobucket.com/user/RBernier/media/PICT0604.jpg.html?sort=3&o=5)
Just finished these knives. Hope the pic comes through.

Title: Re: Just finished a few.
Post by: Track on February 13, 2013, 06:39:00 PM

Oh well, I'll try again when I figure it out.

Title: Re: Just finished a few.
Post by: Track on February 13, 2013, 06:50:00 PM

(http://i1187.photobucket.com/albums/z390/RBernier/PICT0604.jpg)

Title: Re: Just finished a few.
Post by: KHALVERSON on February 13, 2013, 06:57:00 PM

very nice!
i really like the middle one
Kevin

Title: Re: Just finished a few.
Post by: Track on February 13, 2013, 07:16:00 PM

Thanks Kev. That's my favorite too.

Title: Re: Just finished a few.
Post by: L. Harris on February 13, 2013, 07:42:00 PM

Yep! That middle one is nice! As are the other two, I just like the middle ones handle a hair more than the top one.

Title: Re: Just finished a few.
Post by: BowHuntingFool on February 13, 2013, 08:02:00 PM

Very cool, nice work brother!!!!!!

Title: Re: Just finished a few.
Post by: wissler on February 13, 2013, 09:01:00 PM

Very nice.
The middle one screams
They all look sweet though

Title: Re: Just finished a few.
Post by: Lin Rhea on February 14, 2013, 10:50:00 AM

Nice work. What are some specs on the blades?

Title: Re: Just finished a few.
Post by: amar911 on February 14, 2013, 12:15:00 PM

#2 is my favorite too, but I like all of them.

Allan

Title: Re: Just finished a few.
Post by: Track on February 14, 2013, 12:52:00 PM

Thanks much for your great replies, means alot. All the blades are CPM154. Top two blades are 5" long and 5/32" thick. Bottom blade is 6" and 3/16" . I flat ground all the blades from bar stock. I took the ABS forging class in Arkansas several years ago, but haven't gotten a forge set up yet:0( Hopefully soon.

Title: Re: Just finished a few.
Post by: kansas stik man on February 14, 2013, 04:59:00 PM

nice work the middle is my pick, and i went the other way and got a forge instead of a grinder

Trad Gang

Main Boards => Hunting Knives and Crafters => Topic started by: Track on February 13, 2013, 06:38:00 PM