Text only | Text with Images

Trad Gang

Main Boards => Hunting Knives and Crafters => Topic started by: DANA HOLMAN on October 20, 2012, 09:49:00 PM

Title: Black Micarta Hunter
Post by: DANA HOLMAN on October 20, 2012, 09:49:00 PM
This is a 9" hunter I finshed yesterday, to give to a neighbor, 4 1/4" blade steel is 5160, S.S. fitting and black spacer.
I've been out of business for about 6 mo. moved to East Tx. but I"m up and running for the most part. Sorry about the bad picture, (Iphone)The handle looks square but its not.
(http://i663.photobucket.com/albums/uu351/danafoursuns/2012-10-191910161-1.jpg)

Let me know what you think good or bad
Thanks for looking
Title: Re: Black Micarta Hunter
Post by: TheBigRedArcher on October 20, 2012, 10:09:00 PM
Wow Dana, that's really nice looking.
Title: Re: Black Micarta Hunter
Post by: Ray Hammond on October 21, 2012, 07:54:00 AM
Looks swell to me Dana

I know all about that being shut down to move your shop. I'm still not fully done

Good luck in Austin. Hope it's a good move for you
Title: Re: Black Micarta Hunter
Post by: amar911 on October 21, 2012, 04:28:00 PM
Very pretty knife, Dana, even with the crappy photo.

Allan
Title: Re: Black Micarta Hunter
Post by: Steve Nuckels on October 21, 2012, 09:58:00 PM
It is very nice, nice little drop at the point and nice handle shape too.

Steve
--------
Potomac Forge
W.F. Moran Jr. Museum & Foundation
Title: Re: Black Micarta Hunter
Post by: DANA HOLMAN on October 22, 2012, 09:08:00 PM
Thanks Guys for the nice words. still feel like I'm stuck in the same rut.
Dana
Title: Re: Black Micarta Hunter
Post by: Kevin Evans on October 22, 2012, 11:32:00 PM
Nice one Dana.
That little dude can do tons of work !
Title: Re: Black Micarta Hunter
Post by: J Reeves on October 28, 2012, 06:36:00 PM
Looking good Dana, it's not a bad rut if you ask me. Good job.
Title: Re: Black Micarta Hunter
Post by: DANA HOLMAN on October 28, 2012, 07:00:00 PM
Thanks Kevin and Jim, it is a good knife, but I would like to get out of the box, seams I'm missing something on my designs, handles or flow, compaired to the other guys on here.
thanks again
Title: Re: Black Micarta Hunter
Post by: gables on October 30, 2012, 10:41:00 AM
Good looking knife. Nice and clean lines and finish. To break your rut, try copying a knife of a maker you admire and push your limits. Maybe build a frame handled bowie, for example. I recently got great feedback on here and the ABS forum on a knife design. Post a drawing of something to push your limits and incorporate the feedback from others. As makers we want to be pleased by our work but the feedback from others can give you insight. I recently built several full tang belt fininshed blades and went to an area gun and knife show. The feedback was very interesting as was the score sheet I kept of which knives got picked up and admired the most. I see that you have moved and aren't that far from Canton, where mastersmith Tommy Gann lives. I have taken some lessones with him and always come away very inspired.
Title: Re: Black Micarta Hunter
Post by: ridgerunner_sc on February 20, 2013, 08:50:00 AM
decent knife, shame you didnt just take another pic??  you could delete that one..
Title: Re: Black Micarta Hunter
Post by: arrowflipper on February 22, 2013, 10:24:00 PM
Dana i see nothing wrong with that knife! I would be proud to own it. I like the design of it,and the way the finger guard comes off the handle.And no doubt that 5160 will cut like heck! Good work.    :thumbsup:
Text only | Text with Images