Trad Gang

Main Boards => Hunting Knives and Crafters => Topic started by: IdahoCurt on April 06, 2012, 03:54:00 PM

Title: Scales for knife makers
Post by: IdahoCurt on April 06, 2012, 03:54:00 PM
I thought It's time to get some nice wood for scales to the knife makers,please check out my link and let me know if there is anything you guys need.
Thanks very much,Curt
Also check out the giveaway section for some scales.
http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=48&t=001870
Title: Re: Scales for knife makers
Post by: 4est trekker on April 06, 2012, 10:48:00 PM
Hey, Curt...nice looking wood.  I assume these have not been stabilized?
Title: Re: Scales for knife makers
Post by: tippit on April 06, 2012, 11:24:00 PM
Curt, Your woods always look beautiful.  I still have a box of it...but some of those are mighty tempting.  tippit
Title: Re: Scales for knife makers
Post by: Arrowest on April 07, 2012, 12:02:00 AM
Hi Curt,

If still available, I will take items 1,2,3,& 4. PM sent.

Would also be interested in seeing what else you might have and if you had more of the Bastogne Walnut or the Yew.
Title: Re: Scales for knife makers
Post by: IdahoCurt on April 07, 2012, 12:30:00 AM
Forgot to add that these are not stabilized.
  The burl is solid so there should be no problem.
For those who have never tried Bastogne Walnut it is the hardest American walnut,the grain(small pores) is very tight and finishes beautiful.

Scales 1,2,3,4,5 are taken.I will post more up tomorrow
Thanks,Curt
Title: Re: Scales for knife makers
Post by: Ray Hammond on April 07, 2012, 08:36:00 AM
email sent
Title: Re: Scales for knife makers
Post by: IdahoCurt on April 07, 2012, 04:50:00 PM
More Wood added

If you need blocks cut in half or to size,just let me know when ordering.
Thanks,Curt
Title: Re: Scales for knife makers
Post by: rover brewer on April 11, 2012, 06:57:00 PM
gee all the ones I like are sold!!
Title: Re: Scales for knife makers
Post by: IdahoCurt on April 12, 2012, 03:03:00 AM
I appreciate all the interest in the knife wood.Please keep checking as I will continue to add more.
Thanks again,Curt
Title: Re: Scales for knife makers
Post by: IdahoCurt on April 12, 2012, 04:51:00 PM
More scales added 4/12
Thanks
Title: Re: Scales for knife makers
Post by: rover brewer on April 19, 2012, 03:41:00 PM
just recieved my wood very nice, thanks.
Title: Re: Scales for knife makers
Post by: Ray Hammond on April 19, 2012, 06:53:00 PM
Got my koa- beautiful!