Print Page - Curly Maple Necker for a Trad-Ganger

Title: Curly Maple Necker for a Trad-Ganger
Post by: Emmons on August 21, 2011, 12:20:00 PM

Here is a Neck knife made for another Trad-Ganger.

Specs:

O1 blade heat treated to RC60
6-1/4" Overall Lenght
3-1/4" handle to tip with a 3" cutting edge
1/8" thick at the ricasso
15/16" at the widest point
Curly Maple handle with black liners
416 Stainless pins
6oz hand tooled and dyed neck sheath

(http://i12.photobucket.com/albums/a222/JPStangs/IMG_5475.jpg)

(http://i12.photobucket.com/albums/a222/JPStangs/IMG_5477.jpg)

(http://i12.photobucket.com/albums/a222/JPStangs/IMG_5473.jpg)

Thanks for looking,

James

Title: Re: Curly Maple Necker for a Trad-Ganger
Post by: skullworks on August 21, 2011, 02:00:00 PM

Beautiful work!!!!!!!

Title: Re: Curly Maple Necker for a Trad-Ganger
Post by: Toecutter on August 21, 2011, 05:58:00 PM

Was looking at your other knife as well and noticing how tight your sheath work Is!! Great knives and real nice leather work!!

Nathan

Title: Re: Curly Maple Necker for a Trad-Ganger
Post by: Bodork on August 21, 2011, 07:43:00 PM

That knife is SOOOO sweet!!

Title: Re: Curly Maple Necker for a Trad-Ganger
Post by: Steve Nuckels on August 21, 2011, 08:31:00 PM

That is a solid package, with very clean work!

A very nice knife!

Steve
--------
Potomac Forge

Title: Re: Curly Maple Necker for a Trad-Ganger
Post by: DANA HOLMAN on August 21, 2011, 08:58:00 PM

James, that knife is Nice, you finsh is above most
Dana

Title: Re: Curly Maple Necker for a Trad-Ganger
Post by: akaboomer on August 22, 2011, 12:14:00 AM

Very nice. Should be a very happy TG member.

Chris

Title: Re: Curly Maple Necker for a Trad-Ganger
Post by: amar911 on August 22, 2011, 02:02:00 AM

Looks darn nice to me!

Allan

Title: Re: Curly Maple Necker for a Trad-Ganger
Post by: GWV on August 22, 2011, 08:03:00 PM

Nice!!!

Trad Gang

Main Boards => Hunting Knives and Crafters => Topic started by: Emmons on August 21, 2011, 12:20:00 PM