Print Page - First try at knife making!

Title: First try at knife making!
Post by: mike1980 on January 20, 2011, 06:51:00 PM

This is my first attempt at knife making,
I've done a lot of reading here on the forum and had some great direction from a friend. The OAL is 7", blade length 3.5" and the scales are spalted ash. I learned a lot and had a lot of fun in the process!

(http://i1192.photobucket.com/albums/aa327/viking1980/IMG_0468.jpg)

Title: Re: First try at knife making!
Post by: Rick Enos on January 20, 2011, 06:55:00 PM

Looks great Mike.Welcome to the addiction....

Title: Re: First try at knife making!
Post by: bendbig on January 20, 2011, 07:09:00 PM

Looks good. Looks like there's another one hooked.

Title: Re: First try at knife making!
Post by: KHALVERSON on January 20, 2011, 07:20:00 PM

ive seen this knife first hand
it turned out very good for the first one
now quit posting pictures and get to making more knives :bigsmyl:

Title: Re: First try at knife making!
Post by: Ragnarok Forge on January 20, 2011, 07:26:00 PM

Looking good, but you have to post more pics to show off your first work.

Warning this hobby gets expensive!

Title: Re: First try at knife making!
Post by: kansas stik man on January 20, 2011, 07:26:00 PM

very nice knife should be very proud of that one.......but now your addicted huh.

Title: Re: First try at knife making!
Post by: owlbait on January 20, 2011, 07:32:00 PM

Bring that to the Trad league Big Mike. You can use it to cut a piece of crying towel off from Halverson's ;) You definetly need to post more pics. Looks great. Would make a super survival knife on a submerged bowfishing boat!

Title: Re: First try at knife making!
Post by: Steve Nuckels on January 20, 2011, 07:32:00 PM

Yep, more pictures are needed!

Looks good!

Steve
--------
Potomac Forge

Title: Re: First try at knife making!
Post by: mike1980 on January 20, 2011, 07:58:00 PM

Thanks guys and the addiction has taken over!
Heres a few more pics too.

(http://i1192.photobucket.com/albums/aa327/viking1980/IMG_0466.jpg)

(http://i1192.photobucket.com/albums/aa327/viking1980/IMG_0461.jpg)

Title: Re: First try at knife making!
Post by: skullworks on January 20, 2011, 09:45:00 PM

Great job!

Title: Re: First try at knife making!
Post by: OconeeDan on January 21, 2011, 12:10:00 AM

That's a nice knife. Never get rid of this one.
Dan

Trad Gang

Main Boards => Hunting Knives and Crafters => Topic started by: mike1980 on January 20, 2011, 06:51:00 PM