Print Page - Knife for my friend

Title: Knife for my friend
Post by: Idahomike251 on January 11, 2011, 02:20:00 PM

My buddy requested I make him a copy of Randall Gamemaster made out of my favorite blade material (D2 tool steel). Mirror polished blade is 3/16" thick as opposed to Randall's 1/4". I heat treated it to 60 RC. I plan to post picture of the finished knife after stabilized cocobolo handle with brass fittings are installed. (http://i595.photobucket.com/albums/tt31/mokamura_photo/003-1.jpg)

Title: Re: Knife for my friend
Post by: Lin Rhea on January 11, 2011, 03:13:00 PM

I see the beginnings of an outstanding knife. Lin

Title: Re: Knife for my friend
Post by: SveinD on January 11, 2011, 04:20:00 PM

Beautiful blade for sure! Read good things on D2 steel!

Title: Re: Knife for my friend
Post by: OconeeDan on January 11, 2011, 07:31:00 PM

I really like the grind on that blade!
Dan

Title: Re: Knife for my friend
Post by: jomama on January 12, 2011, 11:10:00 AM

Nice blade.

Title: Re: Knife for my friend
Post by: joekeith on January 12, 2011, 01:46:00 PM

:scared: WOW!!!!

Title: Re: Knife for my friend
Post by: Kevin Evans on January 12, 2011, 02:10:00 PM

Great Job!
Wish some of mine had that finish before the guard was installed.

Title: Re: Knife for my friend
Post by: skullworks on January 12, 2011, 06:39:00 PM

Nice...nice....NICE!!!!!

Title: Re: Knife for my friend
Post by: Sheepshooter on January 14, 2011, 11:30:00 AM

My friend bought a knife from you at NALS this summer and it is as beautiful as this one!

Title: Re: Knife for my friend
Post by: fixer on January 14, 2011, 12:20:00 PM

Looks great!!

Title: Re: Knife for my friend
Post by: Track on January 14, 2011, 06:30:00 PM

Nice job.

Title: Re: Knife for my friend
Post by: oldpaths on January 14, 2011, 07:30:00 PM

Very,very nice!!!!!

Title: Re: Knife for my friend
Post by: amar911 on January 16, 2011, 12:49:00 AM

Very good looking blade!

Allan

Trad Gang

Main Boards => Hunting Knives and Crafters => Topic started by: Idahomike251 on January 11, 2011, 02:20:00 PM