Print Page - 360C

Title: 360C
Post by: tomh on September 27, 2009, 06:03:00 PM

I usually make this model as a drop point, but I love clip points so I decided to take a blank and grind a clip and see how it came out. I like it a lot!!

(http://i229.photobucket.com/albums/ee95/tomh73/9-27-09006.jpg)

This is ground from 1/4" thick 1084, differential HT, Coyote brown G10 scales, stainless pins, and a leather sheath.
blade is 4"
OAL is about 8.25"

This thing is stout but it is a cutter!

Title: Re: 360C
Post by: TxMoon on September 27, 2009, 06:13:00 PM

I like it!

Title: Re: 360C
Post by: Steve Nuckels on September 27, 2009, 07:55:00 PM

I like it too! Great knife!

Steve
----------
IN GOD WE TRUST

Title: Re: 360C
Post by: prarieboy on September 28, 2009, 08:23:00 AM

Nice Work I like the quench line!

Title: Re: 360C
Post by: TheBigRedArcher on September 28, 2009, 12:53:00 PM

HOT HOT HOT. Thats a great looking knife.

TBRA

Title: Re: 360C
Post by: Soilarch on September 29, 2009, 11:02:00 PM

I visit bladef***ms quite often, so my little eye have beheld many a fine knife.

This one is an absolute winner.

Gorgeous Looks, and useful size/shape/lines

Title: Re: 360C
Post by: highnoonhunter on September 30, 2009, 08:16:00 AM

All the right stuff!

Title: Re: 360C
Post by: tomh on September 30, 2009, 09:20:00 AM

Glad you like it fellas! I am doing another now with 1/8" thick 1080 and some really nice koa slabs. SHould be a great slicer and a looker!

Trad Gang

Main Boards => Hunting Knives and Crafters => Topic started by: tomh on September 27, 2009, 06:03:00 PM