Print Page - Saw blade knife fabbers....Got a request for ya

Title: Saw blade knife fabbers....Got a request for ya
Post by: vtmtnman on February 13, 2009, 05:59:00 PM

I work at a slate quarry,and I picked up an old blade from the rock saw.I'm looking to fab up a couple of knives at some point.Does anyone have any patterns they can send me via email,full size.This way I could print them out and trace them to the blade?Or maybe there's a web site that has them?

:readit:

Title: Re: Saw blade knife fabbers....Got a request for ya
Post by: vermonster13 on February 13, 2009, 06:05:00 PM

You'd be better off having a mod move this to the knife builders forum Rich.

Title: Re: Saw blade knife fabbers....Got a request for ya
Post by: vtmtnman on February 13, 2009, 06:07:00 PM

Opps...forgot there was a sperate section for that.... :knothead:

Title: Re: Saw blade knife fabbers....Got a request for ya
Post by: Jeremy on February 13, 2009, 08:40:00 PM

Rob posted This Site (http://gbrannon.bizhat.com/old.htm) awhile ago. LOTS of good info, including links to 100's of templates. Look at all of Bob Engnath's patterns... no need to download anything.

Title: Re: Saw blade knife fabbers....Got a request for ya
Post by: vtmtnman on February 14, 2009, 06:47:00 AM

Jeremy,your link dosen't seem to work.I tried it a few times.

Title: Re: Saw blade knife fabbers....Got a request for ya
Post by: Jeremy on February 14, 2009, 08:24:00 AM

Sorry about that! I fixed the link

Title: Re: Saw blade knife fabbers....Got a request for ya
Post by: vtmtnman on February 14, 2009, 09:50:00 AM

Excellent!Thanks.

Trad Gang

Main Boards => Hunting Knives and Crafters => Topic started by: vtmtnman on February 13, 2009, 05:59:00 PM