Print Page - Carbon Ironwood and Mokume Hunter

Title: Carbon Ironwood and Mokume Hunter
Post by: skullworks on January 05, 2009, 09:36:00 AM

Here is a knife made with a Gene Martin carbon blade. Ironwood scales with mokume guards. Mosaic pins in the handle with a brass lanyard tube and nickel silver pins in the mokume. Blade is 4-3/8" and 9" OAL. This one fought me all the way. The scales started out as bookmatched but I didn't sand from the inside of the scales and lost the figure on one side.(DUH!) Ended up with a little epoxy showing between the guard and scales on one side(DUHx2!) Turned out pretty nice anyways. Enjoy!

(http://i27.photobucket.com/albums/c154/Skullworks02/MokumeIronwood.jpg)
(http://i27.photobucket.com/albums/c154/Skullworks02/MokumeIronwood2.jpg)
(http://i27.photobucket.com/albums/c154/Skullworks02/MokumeIronwoodCloseUp.jpg)

Title: Re: Carbon Ironwood and Mokume Hunter
Post by: Nosight on January 05, 2009, 09:56:00 AM

Like the lines..

Later.....Buzz

Title: Re: Carbon Ironwood and Mokume Hunter
Post by: JMR on January 05, 2009, 12:23:00 PM

Really like the look of that knife!!! Looks awesome even if you think you made a couple of mistakes.

Title: Re: Carbon Ironwood and Mokume Hunter
Post by: prarieboy on January 05, 2009, 01:59:00 PM

Too Cool!!

Title: Re: Carbon Ironwood and Mokume Hunter
Post by: Izzy on January 05, 2009, 06:59:00 PM

:notworthy:

Title: Re: Carbon Ironwood and Mokume Hunter
Post by: Toecutter on January 06, 2009, 04:43:00 PM

Nice work again!! How do yo keep up this volume?? I'm jealous as all hell.
Nathan

Title: Re: Carbon Ironwood and Mokume Hunter
Post by: Mechslasher on January 06, 2009, 04:58:00 PM

love the mokume! that one would look good on my hip.

Title: Re: Carbon Ironwood and Mokume Hunter
Post by: Chris Surtees on January 06, 2009, 11:21:00 PM

:thumbsup:

Trad Gang

Main Boards => Hunting Knives and Crafters => Topic started by: skullworks on January 05, 2009, 09:36:00 AM