Print Page - Making a Tomahawk wood question ?

Title: Making a Tomahawk wood question ?
Post by: Dreamcatcher on October 02, 2008, 05:53:00 PM

Hey guys ,,, new here

Trying to make a indian tomahawk. i already have the rock heads , i just need to know how to attach them.

1. i have wood sticks cut to 20" , do i cut a groove and set the head , then tie with sinew and so on ??

do most tomahawks place the head in a notched handle, that is the kind i am trying to make. what is the best way to cut the notch in the wood handle ??

any help would be great.

ty

Title: Re: Making a Tomahawk wood question ?
Post by: theunluckyhunter on October 02, 2008, 07:26:00 PM

band saw? split and tie?

Title: Re: Making a Tomahawk wood question ?
Post by: horatio1226 on October 03, 2008, 07:21:00 AM

Here is one I made. I cheated and used 2 part epoxy to reinforce the head. I then soaked the leather lacing and wrapped around the head

(http://i191.photobucket.com/albums/z267/horatio1226/stonehawk001.jpg)

Title: Re: Making a Tomahawk wood question ?
Post by: Dreamcatcher on October 03, 2008, 11:59:00 AM

Nice tomahawk

Did u glue the wood top on or cut the hole through the wood ??

I am trying to make a notch that the stone head can fit in, then wrap with rawhide and glue with epoxy, then wrap again with leather.

any advice would be great

Trad Gang

Main Boards => Hunting Knives and Crafters => Topic started by: Dreamcatcher on October 02, 2008, 05:53:00 PM