Text only | Text with Images

Trad Gang

Main Boards => Hunting Knives and Crafters => Topic started by: Onkore on August 25, 2008, 09:21:00 PM

Title: Steel Thickness
Post by: Onkore on August 25, 2008, 09:21:00 PM
I'm looking into buying some flat stock and wondering what thickness you guys would recommend.

Thanks
Title: Re: Steel Thickness
Post by: theunluckyhunter on August 25, 2008, 09:49:00 PM
well, what sized knife are you wanting to make???

for everything but really big or really small i will use 1/8.
Title: Re: Steel Thickness
Post by: Lin Rhea on August 25, 2008, 09:53:00 PM
Are you forging or grinding? Lin
Title: Re: Steel Thickness
Post by: Onkore on August 25, 2008, 10:32:00 PM
Mid size knife, 6-9 inches overall.  Grinding.

Thanks for the help.
Title: Re: Steel Thickness
Post by: Jeremy on August 26, 2008, 07:43:00 AM
No need to go any thicker than 1/8".  3/32" would require even less grinding.
Title: Re: Steel Thickness
Post by: Ray Hammond on August 26, 2008, 11:29:00 AM
on the other hand, if you are new to stock removal, you may want to stick with 1/8 in order to have some "fudge" factor.

The master bevel grind on a knife, if you are like me at all, is a real challenge to get even on both sides...having a little bit of extra metal "in case" is often useful.
Text only | Text with Images