Print Page - 440C blade, with ironwood and mosaic pins

Title: 440C blade, with ironwood and mosaic pins
Post by: Ray Hammond on July 12, 2008, 05:18:00 PM

This was an experiment with 440 C. I like it. The bolster drops to act somewhat like a finger guard...1/8 inch mosaic pins and nice damascus on the handle. I think it came out very nice.

(http://i42.photobucket.com/albums/e322/rayhammond123/PICT0323.jpg)

5 inch blade, overall just about 9 inches long...sheath to match as shown

(http://i42.photobucket.com/albums/e322/rayhammond123/PICT0325.jpg)

Title: Re: 440C blade, with ironwood and mosaic pins
Post by: ArrowChucker on July 12, 2008, 05:42:00 PM

Very nice

Title: Re: 440C blade, with ironwood and mosaic pins
Post by: Squirrel Bait on July 13, 2008, 05:15:00 PM

Now that's purty!!!

Trad Gang

Main Boards => Hunting Knives and Crafters => Topic started by: Ray Hammond on July 12, 2008, 05:18:00 PM