any ideas? I would like to see small neck knifes or blades w/tang. With about a 2.5" long blade (max) and a 3" handle (max). Blades around 1/2 to 3/4 wide. or close. Any ideas, pictures, or other??
(http://i258.photobucket.com/albums/hh264/oxbowsteelheader/IM000768.jpg)
(http://i258.photobucket.com/albums/hh264/oxbowsteelheader/IM000767.jpg)
the middle knife is close to those dimensions
hope this helps
kevin
Here's one I made, my favorite (http://i33.photobucket.com/albums/d60/Oarceas/JLMBH07047.jpg)
Here's a little necker I built (on the right). It is held by the first two fingers and the thumb.
(http://i244.photobucket.com/albums/gg5/brettlandon/neckknifefrictionfolder.jpg)
It works great on my flemish string jig.
-Brett
Ru, that one is very unique!
Glad I am not the only guy that likes smaller knives (and shorter bows). Maybe because I am short meself?
Here's my own Necker.
2-3/8" blade 2-1/2" handle. The handle is Buffalo horn with 1 6mm & 1 4mm brass pins. I added a firesteel to the sheath & this li'l thing goes everywhere with me nowadays.
(http://i4.photobucket.com/albums/y110/robtattoo/PSKME001.jpg)
(http://i4.photobucket.com/albums/y110/robtattoo/PSKME002.jpg)
(http://i4.photobucket.com/albums/y110/robtattoo/PSKME003.jpg)
Very nice stuff!
Rob that necker ya got is awesome!!
Thanks guys, man those are awesome and inspire.
RU, you wouldn't want to sell that little osage
skinner, would you?
Jim
PM Sent
E-mail me Mr. Vic. Larry
here is one i made for killdeer. and the bottom one i gave to sticshooter but i think shell got it in the end (http://i259.photobucket.com/albums/hh305/jeffburg/CIMG1651.jpg) (http://i259.photobucket.com/albums/hh305/jeffburg/CIMG1738.jpg)