Text only | Text with Images

Trad Gang

Main Boards => Trad History/Collecting => Topic started by: rendalen on March 05, 2013, 10:39:00 AM

Title: Bear take down limb fit
Post by: rendalen on March 05, 2013, 10:39:00 AM
Hello
I was wondering about the fit of old limbs on a new riser. Do the old limbs fit on the new riser without any problems ? I am curently shooting a new bubinga handle and was thinking about getting a set of older limbs for it.
Regards Øyvind
Title: Re: Bear take down limb fit
Post by: Blackhawk on March 05, 2013, 10:51:00 AM
Should be no problem.  I have the new bubinga handle too with two sets of "old" Grayling limbs that fit just fine.
Title: Re: Bear take down limb fit
Post by: Harry on March 05, 2013, 11:40:00 AM
Also works the other way. I have been shooting new limbs on old handles.  Fit no problem
Title: Re: Bear take down limb fit
Post by: rendalen on March 05, 2013, 02:24:00 PM
Ok thanks.
What is the current cost of a good set of #1 red or white tip limbs in the 40-45 pound range ? Not the new limbs, need to be from the 70`s
Title: Re: Bear take down limb fit
Post by: Blackhawk on March 05, 2013, 03:26:00 PM
A good set will generally cost you $175-250 with the older white tips costing the most.
Title: Re: Bear take down limb fit
Post by: Xavier on March 06, 2013, 09:20:00 PM
I concur. I'm currently shooting my 2012 B handle with old white tips I bought off of a lister for 265. Love the set up!
Text only | Text with Images