I bought an Browning Nomad Stalker I tonite on the auction and it has a Bear spring quiver on it and the whole works is spray painted. I've stripped down an Fury II with 100% acetone before and it turned out beautiful after some Tru oil and advise from you guys. Plan on doing the same with this bow, but I was wondering if the acetone might damage the plastic quiver, dull it or even remove the Bear logo. Any suggestions?
I would not use acetone on plastic. You might try a small spot with Goof-Off and see what happens. I'm not a chemist, but I think acetone would harm the plastic and erase the logo.
Thanks all