Print Page - Bear Mag Riser parts

Title: Bear Mag Riser parts
Post by: Jimscol on December 12, 2011, 07:48:00 PM

I am refinishing a Bear B mag riser for a friend. Does anyone know where I can get the small screws that hold the adjustable arrow plate, or know what size the screws are? I am also looking for a raised medallion and the screw that goes in the quiver tap. Thanks, Jim

Title: Re: Bear Mag Riser parts
Post by: smokin joe on December 13, 2011, 12:28:00 AM

I'll keep an eye on this. I am going to refinish one as well.

Title: Re: Bear Mag Riser parts
Post by: d. ward on December 13, 2011, 05:47:00 AM

nope I do not have any extra's right now myself but I can check with someone that may have a couple extra's bd

Title: Re: Bear Mag Riser parts
Post by: inrut on December 13, 2011, 07:01:00 AM

I have the screws along with a lot of replacement parts for the mag risers. Send me a PM as to what you need.

Title: Re: Bear Mag Riser parts
Post by: Earl E. Nov...mber on December 13, 2011, 07:02:00 AM

I have some, they are not blue, but a magic marker will fix that.
Drop me a PM with your addy and let me know how many you need.

If memory serves me right they are #2-56 x 1/4 Phillips flat heads.. I bought a box from McMaster Carr several years ago.

Title: Re: Bear Mag Riser parts
Post by: Jimscol on December 13, 2011, 04:19:00 PM

Thanks for the replies, Monte (inrut) sent me a PM and I think the he has the parts that I need. Jim

Title: Re: Bear Mag Riser parts
Post by: 450 marlin on December 13, 2011, 05:21:00 PM

They have them a ACE Hardware stores

Title: Re: Bear Mag Riser parts
Post by: wadde on December 13, 2011, 09:42:00 PM

I have some of the screws for the quiver tap.

Trad Gang

Main Boards => Trad History/Collecting => Topic started by: Jimscol on December 12, 2011, 07:48:00 PM