Hi guys what Is the recommended brace height for this bow Its a 62 Inch. Thanks!
I would start at 7.5" and work up. I have mine around 8.25".
Great bow!
I would start at 7.5" and work up. I have mine around 8.25".
Great bow! Pics?
The catalog lists the recommended height as 6.5-7.5" I think. With a dacron string that's a little loud (but it's wonderful with a skinny TS1 string :D ) and most guys are going a little higher. ymmv
The '59 Grizzly is in the running for my favorite Bear of all time!
7 1/2" should work well bd
you can't use fastflight on this bow correct?
no 1960 Grizzly you may get away with FF for a bit because the tip overlays in 1960 were made of fiberglass rather then paper.But again I would just stay with a flemish string or endless loop....better for your bow in the long run trust me.Eather one will work great on that Grizz.Dang it I just sold a 46# 59 Grizzly I completely restored plus I added fiberglass tip overlays to it.Nothing special but I will say this about those 59-60 grizzlys they are not rockets as far as speed goes.But they will stack arrows on top on eack other at 20 yards all day long great shooters and and and I should mention one of the quietest bows ever built period bd
Thanks for all the Info.