Text only | Text with Images

Trad Gang

Main Boards => Trad History/Collecting => Topic started by: Red Dwarf on January 24, 2011, 09:58:00 PM

Title: Bear adjustable arrow plate covering?
Post by: Red Dwarf on January 24, 2011, 09:58:00 PM
I have a '71 Bear T/D with an adjustable arrow plate and am wondering what material the factory put on the plate as a finish for the arrow to rub against?

Red Dwarf
Title: Re: Bear adjustable arrow plate covering?
Post by: OldSkoolArcher on January 24, 2011, 10:08:00 PM
I have seen two different coverings. One is a very very thin leather like covering and another is a thin rubbery covering with horizontal lines.
Title: Re: Bear adjustable arrow plate covering?
Post by: OldSkoolArcher on January 24, 2011, 10:10:00 PM
Not the best pic, but you can somewhat see the leather like covering in this pic of my A-Handle.

(http://i16.photobucket.com/albums/b14/COVEJEEPSXJ/04-24-10009.jpg)
Title: Re: Bear adjustable arrow plate covering?
Post by: OldSkoolArcher on January 24, 2011, 10:18:00 PM
Quick pic of the rubber cover I mentioned above.
(http://i16.photobucket.com/albums/b14/COVEJEEPSXJ/platecover.jpg)
Text only | Text with Images