Print Page - Removing stabilizer insert?

Title: Removing stabilizer insert?
Post by: highlife on February 10, 2010, 01:26:00 AM

Any tricks removing the insert ... I hate the look of that sticking out of the riser ... I was going to fill it with epoxy or make a plug for it.

Thanks for any tips you may have.

Title: Re: Removing stabilizer insert?
Post by: d. ward on February 10, 2010, 07:50:00 AM

(http://i264.photobucket.com/albums/ii175/bowdocsarchery/bushing001.jpg)

Title: Re: Removing stabilizer insert?
Post by: d. ward on February 10, 2010, 07:50:00 AM

(http://i264.photobucket.com/albums/ii175/bowdocsarchery/bushing002.jpg)

Title: Re: Removing stabilizer insert?
Post by: d. ward on February 10, 2010, 07:51:00 AM

(http://i264.photobucket.com/albums/ii175/bowdocsarchery/bushing003.jpg)

Title: Re: Removing stabilizer insert?
Post by: d. ward on February 10, 2010, 07:52:00 AM

(http://i264.photobucket.com/albums/ii175/bowdocsarchery/bushing004.jpg)

Title: Re: Removing stabilizer insert?
Post by: d. ward on February 10, 2010, 07:53:00 AM

(http://i264.photobucket.com/albums/ii175/bowdocsarchery/bushing005.jpg)

Title: Re: Removing stabilizer insert?
Post by: highlife on February 10, 2010, 11:43:00 AM

Doc ... nicely done, perfect!

THANKS

Title: Re: Removing stabilizer insert?
Post by: Gray Wolf on February 10, 2010, 12:01:00 PM

Now do you have to put that back in Doc? GW

Title: Re: Removing stabilizer insert?
Post by: shaft slinger on February 10, 2010, 04:02:00 PM

bd, whats that screw in the base of the latch?? never seen one there before

Title: Re: Removing stabilizer insert?
Post by: d. ward on February 10, 2010, 05:23:00 PM

GW you can reinstall the bushing with a little hot melt or plug the hole eather way.
SS the screws were in the early models and were kind of supposed to set the tiller but the limbs are againest the lip of the socket.So the screws were not really needed bd

Title: Re: Removing stabilizer insert?
Post by: macclare on February 10, 2010, 05:51:00 PM

neat stuff Doc

Title: Re: Removing stabilizer insert?
Post by: shaft slinger on February 10, 2010, 09:24:00 PM

Thanks Bd, i never knew that,as they say " you can allways learn something on the TradGang"

Trad Gang

Main Boards => Trad History/Collecting => Topic started by: highlife on February 10, 2010, 01:26:00 AM