Print Page - What's the history of these?

Title: What's the history of these?
Post by: bowhunterfrompast on July 27, 2009, 10:56:00 AM

Two broadheads with the same design but marked differently.

(http://i698.photobucket.com/albums/vv341/bowhunterfrompast/Broadhead%20Collection/ABCC01000001952Arrowmate_zps963e91ff.jpg) (http://s698.photobucket.com/user/bowhunterfrompast/media/Broadhead%20Collection/ABCC01000001952Arrowmate_zps963e91ff.jpg.html)

(http://i698.photobucket.com/albums/vv341/bowhunterfrompast/Broadhead%20Collection/067.jpg)

Title: Re: What's the history of these?
Post by: Wade Phillips on July 27, 2009, 11:07:00 AM

Both MA-2 & Arrowmate 2 metal ferrule were made in the 1950s and later. Same head made in 4 different sizes 11/32", 5/16", 9/32", 1/4" but cutting the rear of the parts off before the head was assembled.

Made in Wisconsin.

The MA stamping is more common then the Arrowmate stamping.

Title: Re: What's the history of these?
Post by: bowhunterfrompast on July 27, 2009, 11:20:00 AM

Wade..thanks for the info.

I see by looking at the ABCC master list that the Arrowmate 2 was manufactured by Rose Plastics and the MA-2 was manufactured by Make-All Tool & Die.

Was this head made in 4 different sizes as the Arrowmate and the MA-2?

Title: Re: What's the history of these?
Post by: Wade Phillips on July 27, 2009, 11:58:00 AM

Yes. Guess I meant to say both were made in all 4 sizes, but wasn't very clear.

Title: Re: What's the history of these?
Post by: bowhunterfrompast on July 27, 2009, 12:12:00 PM

Wade..I posted just after you edited.

IM sent.

Trad Gang

Main Boards => Trad History/Collecting => Topic started by: bowhunterfrompast on July 27, 2009, 10:56:00 AM