Print Page - can this be fixed?

Title: can this be fixed?
Post by: imskippy on February 23, 2009, 01:56:00 PM

Hey guys I posted this in the powwow but was suggested to post here aswell since alot of guys that visit here know a bit about refinishing. Thanks Skippy

"I have a york ozark LH recurve 55# @ 28" that I won at the JLMBH this weekend. I was going to give it to my dad but when I got home found that the upper limb has a splinter in the glass that is lifting especially when strung. Can this be fixed??? Will a weight reduction help this??

(http://i6.photobucket.com/albums/y249/imskippy/hunting/knife263.jpg)
(http://i6.photobucket.com/albums/y249/imskippy/hunting/knife265.jpg)
(http://i6.photobucket.com/albums/y249/imskippy/hunting/knife266.jpg)
Thanks SKippy"

Title: Re: can this be fixed?
Post by: d. ward on February 23, 2009, 03:39:00 PM

Thats a kind of bad spot however you may try a couple drops of super glue.I use loctite 420.Make sure and let the super glue dry for 24 hrs to make sure it cures inside the splinter...bd

Title: Re: can this be fixed?
Post by: Jeremy on February 24, 2009, 08:27:00 AM

I responded to your post in the PowWow.

Since the splinter is lifted some when it's unstrung as well, you're best bet is some loctite, butcher paper, leather pads and a C-clamp.

Trad Gang

Main Boards => Trad History/Collecting => Topic started by: imskippy on February 23, 2009, 01:56:00 PM