Trad Gang

Main Boards => The Shooters FORM Board => Topic started by: Chub on December 28, 2009, 04:07:00 PM

Title: tail wagging
Post by: Chub on December 28, 2009, 04:07:00 PM
my set up is boblee rec 60inc 45 at 28 i draw to 26.5 ff string i got 3 axis 500 cut to 27.5 bare shaft flys good i hit what i wantfletched hits 4-5inch to right im using 175-200gr tips the fletched arrow tail flys left and rt i say its wagging also tried cock feather in same thing does anyone have an idea why and a cure.... i have been shooting 2013 cut 28 100gr tip but looking for a hunting setup ?
Title: Re: tail wagging
Post by: Winterhawk1960 on December 28, 2009, 04:33:00 PM
Got to Lowe's.......get some double sided carpet tape, and try building out your sideplate, just one thickness of the tape at a time. This should bring you back towards where you are wanting to hit. It might take several pieces of the tape, before you get there......but you will.

Winterhawk1960
Title: Re: tail wagging
Post by: Winterhawk1960 on December 29, 2009, 10:35:00 PM
Chub,

I am assuming, with the above post that you are a RIGHT HANDED shooter. If you are left handed, you need to soften your sideplate.

Sorry, if I confused you........

Winterhawk1960
Title: Re: tail wagging
Post by: Roy Steele on December 30, 2009, 05:04:00 PM
The feathers maybe making your shaffs a little stiff.Or it could just be your arrow hitting the side of the shelf kicking it to the left.
Title: Re: tail wagging
Post by: SL on January 02, 2010, 09:52:00 AM
Check your brace height also. You might need to raise it a touch if the arrows continue to wag at you.
SL