I just picked up a lovely Fox longbow (arctic fox)that pulls 56# at my drawlength (measured with hand held bow scale). I have tried 65-70# spine cedars w/160g up front and they shot OK. Arrows spined at 72# w/160g up front flew like darts. Shouldn't a longbow shoot cedars spined really close to the draw weight the best?
Depends on how the shelf is cut and type of string.
160 grain heads usually require an additional 5# spine, as does fast flight string and if shelf is cut to center or past. To add to the confusion, you are supposed to subtract 5# for every inch below 28". Hopefully someone else more knowledgeable will chime in soon.
QuoteOriginally posted by suburbanirma:
I just picked up a lovely Fox longbow (arctic fox)that pulls 56# at my drawlength (measured with hand held bow scale). I have tried 65-70# spine cedars w/160g up front and they shot OK. Arrows spined at 72# w/160g up front flew like darts. Shouldn't a longbow shoot cedars spined really close to the draw weight the best?
Well,since your getting darts with your #72 w/ 160,I'd stay with that.Spine is weird,pretty subjective.If it's working for ya...stick with it.
Not really..it depends on the bow. If your shooting a bow with a fast flight string that add 10 pounds to the spine of your arrows right there. Then for every inch your arrows are longer than 26 you add 3 pounds. So say your bow is shooting fast flight and if you are shooting a 29" arrow that would put your spine at around 75 pounds. Then from there it depends on if your bow is center cut and what weight head you are shooting. All this plays a factor in getting wood arrows or any arrows for that matter fine tuned.