I hope I'm not being redundant but I've been paper testing my bow today and all I shot was nock high.
I'm shooting a Martin Hunter at 40lbs with a slight cant.
The arrows are right at 400gr with 125gr field points.
Martin recommends a brace height at 7" to 73/4" and I've tried 71/2 to 73/4 but nothing less then that.
I'm wondering if my field points are too heavy? Should I go buy 100gr? I cant think of what else I could be doing wrong.
Any advise?
When paper tuning or bareshaft tuning you should not cant the bow. Try again holding the bow vertical, and see if the results change.
>DEERSLAYER---->
Thank you sir! Thats one thing I didn't consider.
Play with your nock point......