Print Page - Dryad riser?

Title: Dryad riser?
Post by: ranger 3 on February 05, 2018, 11:30:00 AM

I bought a used Dryad riser and when I loosening the bolts the bolt head loosens and the brass sleeve stays sill. I don't know if this makes sense. I don't know if the sleeve should come up from the riser with the limbs. I am new to ILF's.
Thanks

Title: Re: Dryad riser?
Post by: wingnut on February 05, 2018, 11:41:00 AM

The brass sleeve is threaded so if your loosening the bolts with the limbs in place they are probably sticking to the limbs. You can take the bolts out, back the sleeves off a little and locktite them if you want.

Mike

Title: Re: Dryad riser?
Post by: ranger 3 on February 05, 2018, 12:34:00 PM

Thanks Mike, I really like the riser.

Title: Re: Dryad riser?
Post by: wingnut on February 05, 2018, 01:49:00 PM

Actually thinking about it. If it's pretty old it may have the old sleeves without threading. If so, they should be changed out as them may cause a rattle.

Mike

Title: Re: Dryad riser?
Post by: ranger 3 on February 05, 2018, 05:13:00 PM

These are threaded.

Title: Re: Dryad riser?
Post by: Gil on February 09, 2018, 03:10:00 PM

I have an Epic 15 that has the non threaded sleeve. Can I get a pair from you Mike?

Trad Gang

Main Boards => PowWow => Topic started by: ranger 3 on February 05, 2018, 11:30:00 AM