G'day gang, I recently purchased a tree stick 66",#60@30"
As I purchased the bow Pre loved I am after some advice on the recommended brace height range.
Thanks in advance guys
Geoff
Not a lot of those around. Why not just sendTim Mullins an email.
That's a very fine bow you picked up, congratulations. My dad has shot one since 2010 exclusively. However, he's a lefty, so I have not shot it myself. He likes to keep his at 7 3/8". I would expect to find something that works for you a 1/4" either side of that. As Orion mentioned, you don't often see them, so you're quite fortunate.
Best regards, Chase
Mine works best somewhere between 7 1/4 and 7 1/2.
I had one once and 7 1/4 was good, great bows
Thank you for your feedback gang.
I have the next few days free to tune and providing all goes well give the local goat and hogs a rattle up
Geoff I have a 62" Tree Stick 40@28 and it likes 7 1/4" so somewere around that should put you in the sweet spot. Tim builds a great bow and if you have any questions he's a great guy to talk to also.
DJ
Hi I know this is quite an old post but I'd like to ask a clarifying question to those that said a brace height over 7" worked well for them.
Tim told me his recommenced height is 6 1/2, he says his own seem to like a lower height at 6 3/8.
Can you tell me which measurement you are using? From the inner most part of the riser or back of the bow?
Thanks