Trad Gang

Main Boards => PowWow => Topic started by: joel0711 on September 14, 2017, 08:53:00 PM

Title: Sideplate so far left I need a turn signal!
Post by: joel0711 on September 14, 2017, 08:53:00 PM
Damon Howatt 62' 50 lbs at 28
Stupid me cut center shot area back approx. 1/4 inch
long ago now I'm at least learned enough that I made a big boo-boo..I cut a hole and added a Berger type button with solid area for rest mounting. I've added a Flipper rest 2 and 1 layer Velcro to my rest. I centered just right of center shot with only end of arrow showing. I've even tried moving center shot way out to the left (right hand shooter)but no matter I still hit an inch or 2 left at 10 yards. grouping is practically touching,,,just left. I've tried 2016's then 1916's 31'' with 175 grains. Vertical Bow,SRF sight I'm trying out. Any opinions other than safety flagging?? THANKS---Greg
Title: Re: Sideplate so far left I need a turn signal!
Post by: YosemiteSam on September 15, 2017, 10:51:00 AM
If equipment changes aren't working, try form changes.  

Pull the arrow tighter to your face.
Cant the bow more.
Dont cant at all but hold vertical and look down the right side of the string (angles the arrow slightly right).
Just some ideas.
Title: Re: Sideplate so far left I need a turn signal!
Post by: JamesV on September 15, 2017, 02:20:00 PM
If you have a berger button and can adjust the center shot then you could go with a larger diameter arrow, spine should not be much of a factor. 2117, 2213, 2312, 2412, some of these should work.

James